How to fix code 43 errors in windows

Công Nghệ

PUBG di động – phương pháp Đổi máy chủ Trước 60 Ngày | Đổi Từ máy chủ Krip Về máy chủ Asia thành công xuất sắc 100%.

Bạn đang xem: How to fix code 43 errors in windows

Công Nghệ

how to fix rufus error the device is in use by another process in windows, step by step guide.

Công Nghệ Windows has stopped this device because it has reported problems code 43 in Windows 10/8.1/8

Fix USB Device Not Recognized. Device Descriptor Request Failed When you insert any USB Device get the following message “The last USB device you connected lớn this computer malfunctioned, and windows does not recognize it.” The device manager has Universal Serial Bus Controllers Flag USB Device Not Recognized. Device Descriptor Request FailedFirst thing i did was check my USB drivers, but there is not problem with them. After that i checked USB port fearing it might be a hardware problem but again no problem found because other devices are working perfectly lượt thích my keyboard, mouse etc. The problem occur only when i insert my hard disk, so i thought there must be an issue with my hard disk but again no problem found as it was working perfectly in another laptop. Now i was seriously worried because after checking everything this must be a “Motherboard” issuebut i was seriously relived when i found out that the problem is with the Fast startup và USB Selective Suspend Settings are enabled. Let’s see how khổng lồ fix Unknown USB Device problem

Method 1: Use Hardware & Devices troubleshooter

1. Press Windows key + R button to mở cửa Run dialogue box.2. Type ‘Control’ và hit enter to open Control Panel.

3. Inside Control Panel in the search box type ‘troubleshooter‘ and select ‘Troubleshooting.‘

4. After that select ‘Configure a device‘ under ‘Hardware và Sound‘ và follow on screen instruction.

5. If the problem is found, click on ‘Apply this fix.‘This must fix any error which troubleshooter is capable of but if it didn’t then please continue to lớn the next step.

Method 2: Uninstall Drivers

1. Press windows key + R button to open Run dialogue box.2. Type ‘devmgmt.msc’ & hit enter to open Device Manager.

3. In device Manager expand Universal Serial Bus controllers.

4. Connect your device which is not being recognized by Windows.5. You will see an Unknown USB device ( Device Descriptor Request Failed) with yellow sign in Universal Serial Bus controllers.6. Now right click on it & click Uninstall to lớn remove them.

7. Restart your PC và the drivers will be automatically installed.

Method 3: Disable Fast Startup

1. Press Windows key + R button to xuất hiện Run dialogue box.2. Type control and hit enter to open Control Panel.

Xem thêm: Cách Tăng Tốc Download Cốc Cốc Cốc Bằng Cheat Engine, Download Up To 8 Times Faster

3. In the search box of Control Panel type nguồn options.4. Now select ‘Change what the power buttons do.‘

5. Click on ‘Change settings that are currently unavailable.’6. Navigate lớn Shutdown Settings and uncheck ‘Turn on Fast startup.’

7. Next click on Save changes và Reboot.

Method 4: Change the USB Selective Suspend Settings

1. Right click on battery icon & select ‘Power Options.‘

2. Select Change plan settings.

3. Now click Change advanced power nguồn settings.

4. Find USB settings & expand it.5. Again expand USB selective suspend settings & Disable both On battery & Plugged in settings.

6. Click Apply & Reboot.

Method 5: Update Generic USB Hub

1. Press Windows key + R button to open Run dialogue box.2. Type ‘devmgmt.msc’ to xuất hiện Device Manager.

3. Find and expand Universal Serial Bus controllers.4. Right Click on ‘Generic USB Hub‘ & select ‘Update Driver Software.‘

5. Now select ‘Browse my computer for driver software.‘

6. Click on ‘Let me pick from a các mục of drivers on my computer.‘

7. Select ‘Generic USB Hub‘ và click Next.

8. Wait for the installation to lớn finish và click Close.9. Bởi all the above steps for all the ‘Generic USB Hub‘ present.10. If problem is still not solved then follow the above steps till the over on Universal Serial Bus controllers.

This method must fix your error ‘USB Device Not Recognized. Device Descriptor Request Failed‘

Method 6: Remove nguồn Supply khổng lồ Fix USB Device Not Recognized

1. Remove your nguồn Supply plug from PC.2. Now Restart your PC.3. Now connect your USB device to lớn the USB ports. That’s it.4. After the USB device connected to lớn your PC, then plug in power nguồn Supply lớn PC.

Method 7: Update BIOS